Itulak ang Pull Forklift Attachment

Bahay / Lahat ng mga Attachment / Itulak ang Pull Forklift Attachment

Itulak ang Pull Forklift Attachment
A push-pull forklift attachment is a material handling device designed to move long and heavy loads with ease. It is attached to the forklift and helps in pushing and pulling large and heavy loads, making the movement of goods from one place to another much easier. This attachment is especially useful for handling long and narrow loads such as pipes, steel beams, and sheets.

The push-pull attachment is made up of two arms that are attached to the forklift's tines. These arms can be extended to accommodate the length of the load being transported. The arms also have rollers on their ends that make it easier to move the load. The rollers can be adjusted to the desired height, making it possible to transport loads of different heights and sizes.

This attachment is easy to install and operate. It can be easily attached to the forklift and removed when not in use. The arms can be extended or retracted to accommodate the size of the load being transported. The attachment also comes with hydraulic control valves that make it possible to control the speed and direction of the load.

The push-pull forklift attachment is ideal for handling long and narrow loads such as pipes, steel beams, and sheets. It reduces the risk of damage to the load and the environment, as it allows for precise control over the movement of the load. The attachment also helps to increase productivity by reducing the amount of time and effort required to transport the load.

In conclusion, the push-pull forklift attachment is a useful tool for transporting long and heavy loads. It makes material handling easier, reduces the risk of damage to the load and the environment, and increases productivity. This attachment is a must-have for any company that handles long and narrow loads.

Mga Bentahe ng Produkto

HUMAI forklift push/ pull forklift attachment with China Xinchai C490 engine, hydraulic transmission,USA EATON hydraulic assisted steering valve,SHIMADZU oil pump,full suspension chassis.It is widely used to handing all kinds of goods,such as pallet,steel,brick etc.Shantui has cooperated with KOMATSU more than 30 years,all the product was made under KOMATSU standard.

Mga Video

Engine
Model
HUAMAI C490
Rated Output
40/2650
Kw / rpm
Na-rate na Torque
165/1800
N · m / rpm
Hindi silindro
4
Bore × stroke
90 × 105
mm
Pagkalansad
2.7
L
Mga sukat
Pag-angat ng Taas
3000
mm
LxWxH (Sa / Walang Fork)
3779 (2709) x1226x2140
mm
Ang pag-on ng radius
2450
mm
Anggulo ng ikot ng Mast (F / R)
6/12
Degree
Pagganap
Bilis ng paglalakbay (buong pag-load / walang load)
19/20
Km / h
Ang bilis ng pag-angat (may / walang) load
420/450
mm / sec
Max.gradeability
20
%
Ang timbang ng sarili
4560
Kg
Mga gulong at gulong
Harapan
28 × 9-15-14PR
Rear
6.50-10-10PR
Wheelbase
1700
mm
Paglilinis ng Min.ground (palo)
110
mm

Mabilis na Mga Detalye

Kondisyon: Bago
Lugar ng Pinagmulan: Xiamen, China (Mainland)
Pangalan ng Tatak: HUAMAI
Numero ng Model: HUAMAI30
Uri: Pinalakas na Pallet Truck
Power Souce: Diesel Engine
Na-rate na Kumakarga sa Kapasidad: 3000kg
Max. Pagtaas ng Taas: 8000mm
Min. Pagtaas ng Taas: 3000mm
Haba ng Fork: 1070mm
Widget ng Fork: 122mm
Pangkalahatang Sukat: 3829x1226x2140mm
Sertipikasyon: ISO9001 / ISO14001 / CE
Ibinigay ang Serbisyo pagkatapos ng benta: Magagamit ang mga inhinyero sa makinarya ng serbisyo sa ibang bansa
Kagamitan: itulak / hilahin
Laki ng tinidor: 1070 * 122 * 40mm
Load Center: 500 mm
Tyre: Pneumatic
Uri ng kuryente: Diesel
Kulay: Dilaw
Wheel Base: 1700mm
Baterya: 12V / 60Ah
Kapasidad ng tangke ng langis: 50Liter
operating pressure: 17.5Mpa

Kaugnay na Mga Produkto